MTX Universal Driver Basics
Yamaha MTX Matrix Works Randomly or Not Correctly
The situation will happen when there is a STEREO source being routed to a MONO zone. It is frustrating because it is random. Three conditions make this an issue: Control4 does not understand there is anything called Mono Control4 does not understand ...
MTX Overview and Setup Training Videos
These videos will assist you with having a better understanding of the Yamaha MTX and MRX platforms. System and Project Design Configuration Wizard Setting Up the System System Page Layout Overview Making Connections Presets and Putting the ...
MTX RS232 Settings
Using the RS232 for MTX is recommended because of its stability and direct control connection. However, setting up the RS232 connection requires additional some additional steps and information that is not located in the user manual: Use a null modem ...
MTX RS232 or IP Control: Which to use?
The MTX Universal Driver supports both RS232 and IP control. While network control is convenient and reliable we recommend using RS232 as the default method of communication because of its reliable, proven interface that is not reliant on networking ...
MTX Universal Driver Getting Started Guide
This guide will walk you though the basic steps of installing the MTX Universal driver from Blackwire. Adding the MTX Core Driver to the Control4 System Note: Make sure you download and install the latest version of the MTX Universal Driver on your ...
Understanding the MTX Universal Driver Control Targets
The following information outlines how the MTX Universal Driver interacts with the Yamaha MTX3 or MTX5-D audio processors. Primary Control Targets The MTX Universal driver uses the following for primary control targets in the Control4 system Channel ...